|
SANKYO Variax VG-Series
Cam Driven Grip Feeds for Smooth "High-Speed" Operations
SANKYO's Variax
VG-Series feeds with a Roller Gear type Feed Angle Cam and SANKYO's
Special Sine Curve, provides controlled preprogrammed acceleration
and deceleration for a smooth adjustable feed motion. SANKYO's cam
controlled adjustable stock grip and brake pressures, allows for
high-speed operation with less chance of marking soft material such
as copper, aluminum and soft brass, etc.…. than any other type
of feeder on the market. Cam controlled pilot release allows precise
opening and closing of the brake jaw for better control of stock
at high-speeds.
Feeding delicate
and thin material at high-speeds is made possible when using the
SANKYO VG-Series feeds.
SANKYO VG-Series
grip and brake jaws are specially designed for feeding different
types of stock such as flat material from the very soft to the very
hard as well as different types of preformed material. Different
configurations can be designed into the jaws to conform to the shapes
of the material being feed. SANKYO also has jaws for feeding single
or multi square or round wire for different applications. The Grip
and Brake Jaws can be changed very quickly for different types of
jobs.
Features
· Upper and Lower jaws are driven for better gripping
of material at lower pressures.
· Roller Gear type feed angle cam with SANKYO specially
designed sine motion with controlled acceleration and declaration
for smooth feed motion.
· Job change over can be made more quickly than most
other feeds in its class.
· Adjustable feed pitch can be made without changing
cams or gears.
· Adjustable grip force on material.
· Replaceable grip jaws.
· Grip jaws can be changed very quickly.
Options
· "High-Speed" kits for most models.
· Micro-Adjustment for grip and brake jaws eliminating
jaw shims for different material thickness'.
· Different types of stock guides.
· Extended stock guide plate and guides from feed
to edge of press bolster plate.
· Inlet stock catenaries.
· Extra grip and brake jaws with many different types
of gripping surfaces and configurations.
· Guides for wire applications.
· Stock clamp for either flat stock or multi-wire.
· SANKYO Mechanical Self-Compensation Tensioner (S.C.T.)
feed drive.
· SANKYO Servo-Driven (VSD) feed drive.
Typical Applications
·
Feeding Irregularly Shaped Material
· Connectors
· Terminals
· Lead Frames
· Films
· Double strips applications
· Single or Multi - Square or Round Wire.
· Feeding thin material
· "HIGH-SPEED" Feeding Applications.
|
