Features

[ Benefits | Features | Specifications | Accessories | Contact Us ]

• Up to 120-cycles per minute continuous or cycle on demand
• Lift strokes up to 100 mm (3.93") & extend strokes up to 300 mm (11.81").
• Dual cam design offers precise repeatable motions with ±0.02 mm (±0.0008") accuracy.
• 1-input shaft revolution to 1-full cycle ratio for easy drive interface with synchronized or line shaft drive applications.
• All motions are custom and can be symmetrical or non-symmetrical without extra cost.
• Gripper actuation response times are incorporated into the cycle time for continuously running drive motors.
• Blending the X-Y motion corners will reduce vibration, enhance cycle speeds and life hours.
• Five narrow cast iron housing sizes from 70 to 140 mm (2.75"~3.93") dimensional widths.
• Servo motor drives can extend dwell times or supply fast stop/starting frequencies up to 300 cycles per minute.
• Clutch/brake drives can supply stop/starting frequencies up to 80 cycles per minute.
• Right-angle bevel gear drives offer simple line shaft connections for multiple units mounted side-by-side.
• Up to (4) timing sensors with adjustable cam type flags for safety stop interlock or part present checks.
• Additional timing cam sensors can provide an advance signal to start gripper air or vacuum supplies.
• AC or DC motor drives are UL & CE approved with optional explosion-proof or brake motors available.
• Optional quick adjust linear torque limiter with overload sensor mounts for X or Y axis positions.