Features

[ Benefits | Features | Specifications | Accessories | Contact Us ]

• Dial diameters range from 152 to 4550mm (0.5 to 15 feet)
• 90° t2 to 48 incremental output stops, 1-dwell cam equals; 1-output stop to 1-input shaft revolution, 1 to 4 dwell camso 330° index periods with modified sine or constant velocity (~50% CV) cam curves
• Maximum 700 cycles per minute, bi-directional indexing, oscillating motions or non-pattern with servo driven RF cam
• ±20 to 60 arcsec indexing accuracy (average ±10 arcsec), 10 to 30 arcsec repetitive accuracy from the home position
• Painted cast iron housings are available in 13 standard sizes ranging from 45 to 650mm input to output shaft centers
• Standard flange output can be modified with hollow bore or dual output custom configurations
• Index mounts in any position with right angle gearmotor mounting in 90° increments on either side of the index
• Standard brushless dual voltage (230/460) gearmotors are UL & CE certified, brake motor or wash down optional
• Optional R series reducer features low backlash for servo driven or clutch brake applications
• Optional cam balancer offsets the input torque requirement, torque compensation is done with air and/or spring pressure
• Variable frequency drive controller utilizes electronic braking and variable speed for gearmotors in 115-1ph, 230-1/3ph, 460-3ph volts, 50/60 Hz, UL & CE certified
• Stop/start frequency up to 60~90 per minute (output load/reducer dependant), clutch brake or servo drives are available
• Standard IP50 photo eye timing cam sensor package supplies dial 'in position” signal to stop the motor, IP67 proximity type optional