Features

[ Benefits | Features | Specifications | Accessories | Contact Us ]

• Minimal cam degree requirement for maximum output motion while indexing or oscillating
• 2/1 to 8 incremental output stops (2/1 equals 2-output revolutions to 1-input revolution)
• Dial diameters range from 280mm to 800mm (1 to 4 feet)
• 30° to 300° index periods with Sankyo modified sine or constant velocity (~50% CV) cam curves
• Maximum 160 cycles per minute, bi-directional indexing or oscillating motions
• ±30 to 72 arcsec indexing accuracy with 35 to 15 arcsec repetitive accuracy
• Painted cast iron housings are available in 5 standard sizes ranging from 70 to 200mm input to output shaft centers
• Standard shaft output, available with optional TC (coupling type)or TF (shaft to flange type) torque limiting clutch
• Index mounts in any position with right angle gearmotor mounting in 90° increments on either side of the index
• Standard brushless dual voltage (230/460) gearmotors are UL & CE certified, brake motor or wash down optional
• Variable frequency drive controller utilizes electronic braking and variable speed for gearmotors in 115-1ph, 230-1/3ph, 460-3ph volts, 50/60 Hz, UL & CE certified
• Stop/start frequency up to 60 per minute (output load/reducer dependant), clutch brake or servo drives are available
• Standard IP50 photo eye timing cam sensor package supplies dial 'in position” signal to stop the motor, IP67 proximity type optional
• Output torque limiting clutch option features quick-adjust torque setting, automatic reset every 360° & overload detect prox.