Features

[ Benefits | Features | Specifications | Accessories | Contact Us ]

• 1 to 8 incremental output stops, 1-dwell cam equals: 1 output stop to 1 input shaft revolution (1 & 2 dwells offered)
• 90° to 330° index periods in 30° increments with modified sine or constant velocity cam curves (MS, MCV25 or MVC50)
• Standard oscillating angles are 15°, 30° & 45° requiring 30 to 90 degrees of input rotation
• Maximum of 300 cycles per minute (specials over 700-cpm), bi-directional indexing or oscillating motions
• ±60 arcsec accuracy, 60 arcsec repetitive, 2-dwell ±120, 60 repetitive (P40 & P50 are less accurate due to the miniature size)
• Painted cast iron housings are available in 12 standard sizes ranging from 40 to 400mm input to output shaft centers
• Output turret configurations: shaft (standard), shaft with flange, torque limiting clutch, cam balancer or special low inertia for high speed
• Index mounts in any position with right angle gearmotor mounting in 90° increments on either side of the index, P40, P50 & reducers are grease filled for mounting in any position, UL & CE certified (brake motor or wash down optional)
• Variable frequency drive controller utilizes electronic braking and variable speed for gearmotors in 115-1ph, 230-1/3ph, 460-3ph volts, 50/60 Hz, UL & CE certified
• Timing belt driven inline gearmotor can be mounted over or beside the housing (clutch/brake or servo drives optional)
• Output torque limiting clutch option features quick-adjust torque settings to protect the index and an IP65 proximity type overload sensor package can detect when the torque limit is exceeded
• Optional IP50 photo eye timing cam sensor package supplies dial 'in position” signal to stop the motor (IP65 proximity type optional)