Model |
Unit |
7AD |
9AD |
11AD |
15AD |
19AD |
23AD |
33AD |
45AD |
|
|
Literature |
pdf |
|
|
|
|
|
|
|
|
| Dial Diameter |
mm |
560 |
720 |
880 |
1,200 |
1,520 |
1,840 |
2,640 |
3,600 |
| Dial Pilot Bore |
mm |
70 -0.03 |
100 -0.035 |
120 -0.035 |
172 -0.05 |
230 -0.052 |
275 -0.052 |
340 -0.057 |
370 -0.057 |
| Hollow Bore Diameter |
mm |
17.2 +0.15 |
34.2 +0.15 |
45.2 +0.15 |
57.2 +0.15 |
100.2 +0.15 |
127 +0.04 |
100 +0.035 |
120 +0.035 |
| Maximum Axial Load |
N |
3,100 |
4,900 |
6,800 |
11,000 |
18,000 |
27,000 |
34,890 |
47,460 |
| Maximum Radial Load |
kg |
1,400 |
2,100 |
3,400 |
6,800 |
9,000 |
12,000 |
33,570 |
40,750 |
| Shaft Center Distance |
mm |
70 |
90 |
110 |
150 |
190 |
230 |
330 |
450 |
 |
| Output Type |
N/A |
Standard flange with stationary hollow secondary flange, torque limiter, riser
|
| Indexing Stops |
N/A |
2, 3, 4, 5, 6, 8, 10, 12, 15 & 16 stops in 1-dwell with 16, 20, 24 & 32 stops in a 2-dwell cam
|
| Oscillating Angle |
N/A |
Only by forward and reversing the motor with the VFD controller, index is bi-directional
|
| Index Period |
N/A |
120, 150, 180, 210, 240, 270, 300, 330 (index periods are stop dependant)
|
| Output Bending Moment |
N-m |
32 |
98 |
147 |
333 |
980 |
600 |
2,030 |
3,070 |
|
| Input |
N/A |
Optional drive package or timing cam sensor packages can be added (see below) |
| Input Speed |
rpm |
0~200 |
| Input Bending Moment |
N |
1,600 |
2,500 |
3,500 |
4,000 |
5,000 |
6,000 |
20,900 |
27,000 |
|
| Index Accuracy (1-dwell cam) |
arc seconds |
+30 (average +9 on standard units) |
+20 |
| Index Accuracy (2-dwell cam) |
arc seconds |
+60 (2-indexes per input revolution) |
+40 |
| Repetitive Accuracy |
arc seconds |
30 (each station is measured for home reference) |
+20 |
| Index Weight (no drive) |
kg |
15 |
24 |
42 |
85 |
180 |
285 |
1,000 |
1,600 |
|
| |
Gearmotor (standard) |
N/A
|
Brushless, high efficiency hypoid type, right-angle with hollow bore, 230 or 460 dual voltage, 3-phase, 50/60 Hz, 16-mounting position configurations, CE & UL approved |
| Gearmotor Power |
kW |
0.1~0.2 |
0.2~0.4 |
0.4~0.7 |
0.7~1.5 |
1.5~2.2 |
2.2~3.7 |
5.5~7.5 |
11~15 |
| Gearmotor Weight |
kg |
8~10 |
12~13 |
13~22 |
22~35 |
35~81 |
81~119 |
210~240 |
370~410 |
| C-face Reducer |
N/A
|
Hypoid type, IEC metric or NEMA inch motor mounting |
| Clutch-brake |
N/A
|
Optional with C-face reducer, adds 127mm to 228mm (5" to 9") of length
|
| Wash-down |
N/A
|
Optional with gearmotor or C-face reducer |
| Explosion Proof |
N/A
|
Optional with C-face reducer |
| Motors |
N/A
|
C-face, any name brand, AC or DC, wash-down, explosion proof, 115 to 575 volts, servo |
|
| |
Output Clutch Torque Limiter |
N/A |
Auto reset every 360o with +15 arcsec accuracy, 30 arcsec lost motion, +10% tripping torque accuracy, detent ball, adjustable torque range, hollow flange mount |
N/A |
| Torque Capacity |
N-m |
40~250 |
60~450 |
90~600 |
300~2,200 |
500~4,500 |
1,200~5,500 |
N/A |
| Torque Limiter Overload Sensor |
N/A |
PNP (standard) or NPN proximity type, 2-meter molded cable, (IP67/NEMA-6)
|
N/A |
| Timing Cam Sensor Package |
N/A |
Adjustable plastic cam 180~360o notch, PNP photo eye sensor (IP50) with 2-meter connector cable (standard) optional steel cam, proximity sensor (IP67/NEMA-6), NPN & explosion proof are available
|
| VFD Controller |
N/A |
120v, 230v, 460v (575v with C-face reducer)
|
230v, 460v (575v with C-face reducer)
|
| VFD Features |
N/A |
Maintenance free electronic braking, variable or multiple pattern speeds, reversible for oscillating, motor overload protection, 120 to 575 input voltages, IP65/NEMA-6 wash-down & password protected
|
|
* Load capacities vary with stroke length, above weights are estimated at mid strokes
Inverted mounting may reduce the cycles per minute & load carrying capacities |
