Features

[ Benefits | Features | Specifications | Accessories | Contact Us ]

• 2 to 32 incremental output stops, 1-dwell cam equals; 1-output stop to 1-input shaft revolution, 2-dwells for 16 to 32 stops
• Dial diameters range from 280mm to 3600mm (1 to 12 feet)
• 120° to 330° index periods with Sankyo modified sine or constant velocity (~50% CV) cam curves
• Maximum 200 cycles per minute, bi-directional indexing, oscillating motions (non-pattern for servo driven AR/ServoDEX)
• ±30 arcsec indexing accuracy (average ±9 arcsec), 30 arcsec repetitive, ±60 arcsec for 2-dwell cams for 16 to 32 stops
• Painted cast iron housings are available in 8 standard sizes ranging from 70 to 450mm input to output shaft centers
• Standard stationary hollow flange output with tolerance bore, available with optional torque limiting clutch
• Index mounts in any position with right angle gearmotor mounting in 90° increments on either side of the index
• Standard brushless dual voltage (230/460) gearmotors are UL & CE certified, brake motor or wash down optional
• Variable frequency drive controller utilizes electronic braking and variable speed for gearmotors in 115-1ph, 230-1/3ph, 460-3ph volts, 50/60 Hz, UL & CE certified
• Stop/start frequency up to 60~90 per minute (output load/reducer dependant), clutch brake or servo drives are available
• Standard IP50 photo eye timing cam sensor package supplies dial 'in position” signal to stop the motor, IP67 proximity type optional
• Output torque limiting clutch option features quick-adjust torque setting, automatic reset every 360° & overload detect prox.