 |
 |
|
Features
[ Overview
| Features
| Specifications
| Accessories
| Contact
Us ]
- 4 to 96 incremental output stops,
1-dwell cam equals; 1-output stop to 1-input shaft revolution,
2-dwells for 48 to 64 stops
- Dial diameters range from 320mm to 6400mm (1 to 21
feet)
- 90° to 330° index periods with modified sine
cam curve
- Maximum 200 cycles per minute, bi-directional indexing,
oscillating motions (non-pattern the servo driven RT
series)
- ±30 arcsec indexing accuracy, 30 arcsec repetitive
for 8~25DT, ±60 arcsec for 2-dwell cams (±20
arcsec for 35~80DT)
- Painted cast iron housings are available in 11 standard
sizes ranging from 80 to 800mm input to output shaft
centers
- Standard stationary hollow flange output with tolerance
bore (available with optional torque limiting clutch
up to 25DT)
- Standard brushless dual voltage (230/460) gearmotors
are UL & CE certified, brake motor or wash down
optional
- Variable frequency drive controller utilizes electronic
braking and variable speed for gearmotors in 115-1ph,
230-1/3ph, 460-3ph volts, 50/60 Hz, UL & CE certified
- Stop/start frequency up to 60~90 per minute (output
load/reducer dependant), clutch brake or servo drives
are available
- Standard IP50 photo eye timing cam sensor package supplies
dial 'in position' signal to stop the motor, IP67 proximity
type optional
- Output torque limiting clutch option features quick-adjust
torque setting, automatic reset every 360° &
overload detect prox.
- Cam balancer Accessories offers input torque compensation
to minimize motor horsepower requirements
|
|
|
|
