|
|
 |
|
|
 |
|
 |
|
|
|
 |
| |
|
P
Series Parallel P/E Type |
|
| These
drives are available as roller, indexing, and oscillating drives. |
|
 |
The
P series is the ideal indexing unit for high-speed applications
requiring few stops, such as conveyors with relatively
long feed pitches or long dwell periods. This single-dimensional
indexing unit uses two parallel plate cams on the input
shaft to impart intermittent motions to the followers
on a spider located on the output shaft. The input and
output shafts are parallel. It is easy to produce drives
with any small number of stops, such as 1, 2, or 3.
This mechanism possesses the same superior characteristics
of our roller-gear cam type indexing units. Sankyo's
original uneven-pitch parallel cam increases load capacity
and accuracy, making it possible to produce drives that
uses to be technically unfeasible. The accuracy, speed
performance, and reliability make the P series the ideal
intermittent indexing mechanism for today's industrial
machinery.
Sankyo's table-type indexing drives are widely recognized
for their ability to meet the demands of less energy,
high precision, and high efficiency.
|
| |
|
|
Housing
Size
|
40,50,65,80,100,125,150,175,200,250,320,400
|
| Type
P |
Number
of stops |
1,2,3,4,6,8
|
| Type
E |
Oscillating
Angle (deg) |
15,30,45
|
|
Input
shaft speed (rpm)
|
0~300
|
|
| |
|
Features
|
| |
|
•Standard
line of small-to large size models (shaft-to-shaft distances
: 40 to 400mm).
•Suitable for equipment with a low number of stops (1
to 8 stops).
•The input and output shafts are parallel.
•Can be installed in a variety of positions and mounting
orientations for use in many different applications.
|
|
|
|
