Sankyo America (The Global Standard in CAM Indexing)

Sankyo America (The Global Standard in CAM Indexing)

Home - Accessories - Torque Limiters - Air Adjust (TAF Series) - Specifications
Home
About Us
Rep Locator
Cam Indexers
Flexible Servo Index
Part Handlers
Accessories
Torque Limiters --
Shaft-to-Flange -----
Shaft Coupling -----
High-Capacity -----
Flange-to-Flange -----
High-Speed -----
Low Torque Range -----
High-Frequency -----
Air Adjust -----
Linear Torque Limiter -----
Output Risers --
Timing Cam Packages --
Motor Drive Controllers --
Gear Motors --
Reducers --
Assembly Chassis
Machine Tools
Coil Feeds for Presses
Technical Resources
Site Map
eNEWS
Downloads
Contact Us


Sign Up & Be Informed!

TAF Series Torque Limiting Clutch


SANKYO torque limiting clutches are detent ball and pocket type designs. It features a compact size with accurate reset positions, accurate overload ranges, no backlash and easy torque range setup by adjusting an air regulator. Precision machined mounting surfaces include centering pilots with minimal runout surfaces.

Air Adjust - Torque Limiting - Automation Equipment - Sankyo America

Features

Torque Range: (2) adjustable torque ranges for each size, 50~650 Nm (442~5,752 lb*in)
Overload Torque Range Accuracy: within ±10%
Torque Adjust Method: by air pressure
Reset Accuracy: ±15 arc seconds (±0.0007" on a 10" radius)
Rotational Speed: 300~600 RPM
Rotational Direction: operates in forward or reverse directions
Reset Method: automatic, every 360 degrees
Overload Detection: large ring moves away from fixture (sensor optional)
Option: dowel holes, FDA grade grease, overload sensor
Warranty: 1 year (parts/labor)

As shown below, the torque is adjusted by changing the air pressure. The TAF series mounts to a hollow shaft with a cross bore. Air is routed through the shaft and rotary coupler.

Air Adjust - Torque Limiting - Automation Equipment - Sankyo America

 

DESCRIPTION
Unit
7TAF
8TAF
11TAF
Dimensions, Catalog Page
PDF
Literature, Catalog
PDF
Literature, User Manual
PDF
CAD Drawing Download
-
Torque Capacity
N*m
50~200
120~400
200~650
lb*in
442~1770
1062~3540
1770~5752
Pilot Bore
mm/inch
75/2.95"
100/3.93"
120/4.72"
Mounting Bolt Diameter
mm/inch
95/3.74"
120/4.72"
148/5.82"
Maximum Speed
RPM
600
400
300
Reset Angular Accuracy
arc sec
±15 (±0.0007" on a 10" radius)

 

 

© Copyright Sankyo America, Inc. All Rights Reserved.
Submit Comments to Webmaster